Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Silestone Driveway & Pavers: The Austin Owner’s Guide
Silestone driveway and paver work in Austin typically runs $7,000 to $18,000 installed, and we stock the hardscape materials, edge restraints, joint sand, and drainage components needed for most jobs. You’ll usually know something’s wrong the day water pools against the foundation instead of running off, or the moment a paver rocks under your foot after a hard rain. We’re Mason Remodeling Co Austin, an independent contractor not affiliated with Silestone, and we’ll walk you through what failed, what it costs to fix, and who’s coming to your door.
Which Silestone Models This Applies To
Silestone is best known as a quartz countertop brand, but homeowners searching for “Silestone driveway” are usually dealing with one of two things: a Silestone kitchen that’s tied into an outdoor paving project, or confusion between Silestone and a paver manufacturer. Here’s the straight answer: Silestone does not make driveway pavers. What homeowners actually need is a hardscape system that sits well next to their Silestone work, and we supply and install pavers from Belgard, Unilock, and Techo-Bloc through our material partnerships. Those three lines cover the full range of driveway pavers you’ll see in Austin, from tumbled concrete cobble to permeable systems that handle our flash-flood downpours.
The compatibility question that actually matters: your paver choice has to match your base depth and drainage plan, not the Silestone product inside the house. We’ll verify that on site. If you’ve got a Silestone outdoor kitchen countertop on a paver patio, we also match the paver joint color and edge profile so the hardscape doesn’t fight the surface tones.
Styles & brands we work with
Signs Your Silestone Driveway & Pavers Is Failing
- Water pooling against the garage or foundation. Austin’s clay soil expands and contracts with every wet-dry cycle. When the base under pavers washes out, the driveway loses its pitch and water runs the wrong way. This is the most common failure we see in neighborhoods like Mueller and Cherrywood.
- Individual pavers rocking or sinking. A rocking paver means the sand bedding has eroded underneath. It’s not just cosmetic – every rocking paver lets water into the base, which accelerates the failure of the ones next to it.
- Edge pavers creeping outward. Edge restraints fail when the plastic or aluminum strip gets pushed by vehicle weight on a hot Austin afternoon. Once the edge lets go, the outer course of pavers drifts and the whole field starts shifting.
- Joint sand disappearing after every rain. If you sweep new polymeric sand in and it’s gone in three weeks, water is running through the joints too fast. The pitch has changed or the base is no longer draining properly.
- Moss or weeds constantly returning between pavers. Persistent growth means the joints hold moisture. In Austin’s humidity and heat, that moisture also attracts ants, which tunnel through the sand and hollow out the support under the pavers.
Replacement Cost & What’s Included
A full paver driveway installation in Austin runs $7,000 to $18,000. Driveway replacement work, if you’re tearing out an existing asphalt or concrete pad and installing pavers, lands in the $5,000 to $14,000 range depending on square footage and access. What drives the price: the paver product line you choose, the depth of the aggregate base we install, whether we’re adding drainage (channel drains or French drains), and how much demolition the old surface requires.
Every quote from Mason Remodeling Co Austin includes the parts, the labor, the base material, the edge restraints, the joint sand, and haul-away of old material. You get a written price before we start, no verbal ballpark that grows later. The work is covered by our 365-Day Done Right Promise: if something isn’t right within a year of completion, we make it right at no cost to you. That includes a free return visit if a paver settles or a joint fails.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely check a few things yourself. Walk the driveway after a rain and mark the spots where water stands. Tap pavers with a rubber mallet and listen for hollow sounds – a dull thud means a void underneath. Take photos from the street and from the garage looking out. That diagnostic walk helps us quote faster.
What you shouldn’t DIY is lifting and re-setting pavers on a driveway that carries vehicle weight. Paver driveways need a compacted aggregate base, proper edge restraint, and correct joint sand. Do it wrong and you’ll have the same failure again in six months, only now you’ve spent a weekend and a few hundred dollars on materials. Tell me what’s wrong with it. We’ll figure out what it actually needs. Then we’ll give you a written price before anything is dug up. Call (903) 623-1966 and we’ll schedule a look.
FAQs
A properly installed paver driveway in Austin should last 25 to 30 years before the base needs major work. The pavers themselves rarely fail; it’s the base, the edge restraints, and the drainage that give out first. Austin’s clay soil and heavy spring rains shorten that lifespan if the base wasn’t deep enough to begin with. Call (903) 623-1966 for an inspection and we’ll tell you honestly how much life your driveway has left.
Yes, in most cases we can repair a failing paver driveway without a full replacement. If the failure is limited to a low spot or a blown edge, we lift the affected pavers, re-compact the base, re-set the restraint, and re-sand the joints. Full replacement is only needed when the base itself has washed out across a large area. Call us for a free estimate and we’ll tell you which situation you’re in.
Most paver driveway repairs take one to two days on site. A full paver driveway installation typically takes three to five working days depending on size, access, and whether we’re removing an old concrete or asphalt surface first. We’ll give you a timeline in writing when we quote the job.
We stock joint sand, edge restraints, drainage components, and base aggregate, and we order the paver product you choose through our supplier partnerships with Belgard, Unilock, and Techo-Bloc. That usually means materials are on site within a few business days of your written approval. We also carry replacement parts and accessories for KraftMaid cabinetry, Cambria surfaces, and Kohler fixtures if your outdoor project touches any of those.
Call Mason Remodeling Co Austin
If your driveway or paver patio is showing any of the signs above, call (903) 623-1966. A live person answers, 24 hours a day, seven days a week. You’ll get a straight answer about your situation, a written price before any work starts, and the name and photo of the technician before they arrive at your door. Isaac Pruett and the Mason Remodeling crew have been fixing Austin hardscape for years and we don’t leave until the job is done right.
Written by Isaac Pruett, Owner, Mason Remodeling Co Austin at Mason Remodeling Co Austin, serving Austin and nearby areas.
