Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Austin Homeowners Choose Mr-Glass Construction
We’re an independent Austin construction company that services and installs Mr-Glass shower enclosures, hardware, and the remodel work that surrounds them. We see how these products actually perform in Central Texas homes every single week, from hard-water mineral buildup on glass panels to hinge sag on heavy pivot doors. If you own a Mr-Glass enclosure and something’s off, call us at (903) 623-1966 and we’ll walk through what’s happening before you spend a dime.
Mason Remodeling Co Austin is not affiliated with or authorized by Mr-Glass. What we are is a local crew that has pulled apart, repaired, and reinstalled enough Mr-Glass hardware to know exactly how it behaves in Austin’s specific conditions. That matters more than a logo on a service van.
Why Trust Mason Remodeling Co Austin for Your Mr-Glass Construction?
Mr-Glass enclosures are engineered tight. That’s the appeal: clean frameless lines, precise glass cuts, hardware that should disappear into the design. But that precision means small problems show up fast, and fixing them incorrectly makes everything worse. Our techs know the difference between a worn roller and a track that was never level. We carry OEM Mr-Glass components for the parts that matter most: hinges, rollers, seals. For trim and non-structural fittings, we source quality aftermarket equivalents when they perform the same and cost less. We’ll tell you which is which before we order anything.
Isaac Pruett, our owner, learned construction at Los Angeles Trade-Technical College and spent years on residential and commercial jobs up and down the West Coast before bringing his crew to Austin. He’s been serving homeowners here for several years now, including plenty of work in the Mueller neighborhood. Isaac’s the guy who gives you a straight estimate and doesn’t leave until the punch list is finished. “Tell me what’s wrong with it. We’ll figure out what it actually needs.” That’s how he runs every Mr-Glass job.
Styles & brands we work with
Common Mr-Glass Construction Problems We Fix in Austin
Here’s what we actually see on Mr-Glass enclosures in Austin homes, and why each one happens. If any of this sounds familiar, you’re not crazy, and it’s usually fixable without ripping out the whole enclosure.
- Mineral etching and haze on frameless panels: Austin’s water is hard. Calcium and magnesium settle into the glass surface, and over time the etching becomes permanent if it isn’t caught early. We clean and reseal panels where the surface is intact. If the glass is already etched white and cloudy, we’ll tell you straight: replacement is the only real fix.
- Roller wear and track misalignment on bypass sliding doors: Mr-Glass bypass enclosures ride on small nylon rollers inside the top track. Those rollers flatten over time, especially in bathrooms with high humidity and big temperature swings. The door starts jumping, dragging, or drooping on one side. We replace the rollers with OEM Mr-Glass parts and realign the track so the door glides like new.
- Hinge sag on pivot and hinged door series: A frameless pivot door is heavy glass swinging on two hinges. Every open and close puts stress on those hinge points. We see sag where the door no longer closes flush, and the gap at the latch side grows. That’s almost always hinge adjustment or hinge replacement, not a new door.
- Water seepage past degraded vinyl sweeps and seals: The vinyl sweep on the bottom of a Mr-Glass door and the seals along the edges crack and stiffen with age. Austin’s hard water accelerates that. Water leaks onto the bathroom floor even though the glass looks fine. Seals and sweeps are inexpensive to replace, and it’s the repair we do most often.
- Track corrosion and mineral clogging near the drain line: In bathrooms with poor ventilation, the aluminum track on a Mr-Glass enclosure can corrode from standing water and mineral deposits. When the track channels are clogged, the rollers bind and the door fights you. We clear the channel, treat the corrosion, and recommend ventilation upgrades if the bathroom needs it.
Mr-Glass Parts & Our Repair-vs-Replace Approach
For critical components like hinges, rollers, and seals, we use OEM Mr-Glass parts when they’re available. These are the parts that carry the load and the movement, and they’re engineered to the enclosure’s exact tolerances. For trim, handles, and non-structural fittings, we may source quality aftermarket equivalents that perform as well and cost less. We’ll show you the difference in writing before we order.
The repair-vs-replace call comes down to two things: what’s worn and what’s still sound. If the glass is clear and the frame is intact, we repair. On a west Austin remodel, our techs pulled a Mr-Glass bypass shower door with worn nylon rollers that caused jumping and a drooping panel. We replaced the rollers with OEM Mr-Glass parts, realigned the track, and adjusted the door height so it glides smoothly. No new enclosure needed. If the glass is etched beyond economical repair or the track is corroded through, we’ll recommend full enclosure replacement and give you the real numbers. Call (903) 623-1966 and we’ll tell you which path makes sense before any work starts.
Our Mr-Glass Service Process – Step by Step
Most Mr-Glass service calls follow the same sequence. Here’s what you should expect when we come out:
- 1
Diagnosis: We inspect the enclosure, identify the exact failure point, and explain it in plain language. You’ll have a written diagnosis, not a verbal shrug.
- 2
Parts and approach decision: We tell you what needs OEM Mr-Glass and what can use aftermarket. You get the written price before any work is approved.
- 3
Repair or installation: We handle the repair or full installation with the right tools for heavy glass panels, including proper shimming and leveling on Austin’s often out-of-plumb walls.
- 4
Testing: Every Mr-Glass door gets cycled multiple times. We check for smooth travel, proper sealing, and flush closure. If the sweep or seal doesn’t seat right, we adjust until it does.
- 5
Warranty and follow-up: Every completed project is covered by a written guarantee with clearly stated terms, 365 days from the completion date. If a repair fails, we come back at no charge.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Products We Service & Install in Austin
We service and install the full range of Mr-Glass shower enclosure styles found in Austin homes:
- Mr-Glass frameless sliding shower door series (bypass): Doors on tracks, common in tub and shower combos. We handle roller replacement, track realignment, and panel adjustment.
- Mr-Glass pivot/hinged shower door series: Single swinging panels used in walk-in showers. We handle hinge adjustment, seal replacement, and full door replacement when glass is damaged.
- Mr-Glass inline shower panel series: Fixed glass panels that create a partial enclosure. We install and service these for walk-in showers and tub-to-shower conversions.
- Mr-Glass neo-angle shower enclosure series: Corner units with angled glass panels. We handle full installation, seal replacement, and hinge repair.
We keep common OEM Mr-Glass parts in stock for faster turnaround: rollers, sweeps, seals, and hinge components for the most popular series. If we don’t have a part on hand, we order it and schedule the return visit. No paid guessing.
We Also Service These Brands
While Mr-Glass is a big part of what we fix, we’re not a single-brand shop. We work with KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures on full bathroom and kitchen remodels. That matters for Pflugerville homeowners and others in the area doing a complete bath overhaul: you get one crew for the glass, the tile, the plumbing, and the finishes, with one written price for the whole job.
FAQs – Mr-Glass Construction Service in Austin
Yes. A leaking neo-angle enclosure is usually the vinyl seals at the glass-to-wall and glass-to-glass joints, not the enclosure itself. We replace the Mr-Glass seals, reset the glass if it’s shifted, and test for leaks before we leave. If the seals are old and cracked, this is a straightforward job in Austin homes with hard water, where seal material degrades faster than the national average. Call (903) 623-1966 for an exact quote.
We use genuine Mr-Glass rollers for bypass doors whenever we can get them. The OEM rollers are matched to the track profile and door weight, and aftermarket rollers often bind or ride differently. We’ll tell you if an aftermarket equivalent is acceptable for your specific situation before we order. Call (903) 623-1966 if your door is jumping or dragging and we’ll diagnose it over the phone.
Pivot hinges sag because the hinge bushings and mounting screws take the full weight of a heavy glass panel every time the door swings. Over years of use, the bushing wears and the door drops slightly at the latch side. That’s almost always repairable. We realign the hinges, replace the bushings if needed, and adjust the door so it closes flush. We don’t sell a new door when a hinge rebuild fixes it. Call (903) 623-1966 for a free estimate on hinge repair.
It depends on how deep the etching goes. Austin’s hard water deposits calcium and magnesium that bond to glass over time. Light haze can often be removed with professional glass restoration. But if the glass looks white and cloudy even when wet, the etching is permanent, and replacement is the only way to get clear glass back. If the frame, hinges, and track are still sound, you can replace just the glass panel rather than the whole enclosure. Call (903) 623-1966 and we’ll assess your glass in person and give you the real cost for either path.
Yes, and that’s one of the most common Mr-Glass installs we do. A tub-to-shower conversion in Austin typically means removing the tub, installing a shower base, waterproofing the walls, and adding a fixed inline glass panel or a panel-plus-door combination. We install Mr-Glass inline panels with proper anchoring and waterproofing suited to Round Rock’s humidity and hard water conditions. Call (903) 623-1966 for a written quote on your conversion including the glass.
Here’s what we charge for the most common Mr-Glass jobs in the Austin market:
| Service | Price Range |
|---|---|
| Shower Replacement (Mr-Glass enclosure) | $3,000 – $8,500 |
| Walk-In Shower Installation with Mr-Glass glass | $4,500 – $12,000 |
| Full Bathroom Remodel including Mr-Glass enclosure | $9,000 – $28,000 |
Your final number depends on glass thickness, panel count, framing condition, and whether we’re doing tile, plumbing, or other remodel work at the same time. Call (903) 623-1966 for a written, line-item price. It’s free, and it doesn’t obligate you to anything.
Book Your Mr-Glass Service in Austin, TX
If your Mr-Glass enclosure is dragging, leaking, or just looks rough, call (903) 623-1966. We’ll schedule a visit, diagnose the problem, and give you a written price before any work starts. No sales pitch, no pressure, just a straight answer.
Written by Isaac Pruett, Owner at Mason Remodeling Co Austin, serving Austin homeowners since bringing his crew to Texas several years ago.
