Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Austin Homeowners Choose Jerith Construction
We provide Jerith repair in Austin, including independent aluminum fence and gate repair, installation, and refit service across the city, and we’ve been doing it long enough to know which models hold up to our clay soils and which need reinforcement. If you own a Jerith fence, pool gate, or driveway gate in Austin, we can service it properly using genuine Jerith hardware where it matters and honest guidance when replacement makes more sense than repair. We are not affiliated with or authorized by Jerith, and we’re upfront about that. Call (903) 623-1966 for a free estimate on any Jerith fence or gate work.
Austin’s building conditions are harder on aluminum fencing than most people realize. The east side’s blackland prairie clay expands and contracts so aggressively during wet-dry cycles that concrete fence post collars shift, pulling posts out of plumb. On the west side, drillers hit limestone within 10 feet, which complicates any post setting or gate foundation work. Add in the city’s Save Our Springs Ordinance restrictions on development near the Edwards Aquifer recharge zone, and you need a crew that understands both the product and the ground it’s going into. Isaac Pruett and our team have been working on Jerith systems in Austin neighborhoods for years, from Mueller to the older pier-and-beam bungalow blocks near downtown.
Why Trust Mason Remodeling Co Austin for Your Jerith Construction?
Jerith aluminum fencing is built to a standard most big-box fence panels don’t reach: thicker extrusions, factory powder-coat in specific bronze and black tones, and hinge hardware that’s designed to be serviceable. But the product is only as good as the install and the ongoing care. We’ve rebuilt enough Jerith pool gates and straightened enough Jerith driveway gates in Austin to know exactly what fails and why. Isaac Pruett grew up in Los Angeles, trained at Los Angeles Trade-Technical College, and spent years on residential and commercial jobs up and down the West Coast before bringing that experience to Austin. When a Jerith gate sags on a 100-degree afternoon, he doesn’t guess. He checks the hinge bolts, the post plumb, and the concrete collar before recommending anything.
Every Mason Remodeling Co Austin technician is background-checked and identity-verified through the Threshold Standard. You’ll get the name and photo of the technician before we arrive, and they’ll show a photo ID badge at the door. The price is written down before any work starts, on every Jerith job, every time. And if the work isn’t right within 365 days of completion, our Done Right Promise means we come back and make it right at no cost to you.
Styles & brands we work with
Common Jerith Construction Problems We Fix in Austin
- Gate sag and latch misalignment on wide double-drive gates. Jerith’s double-swing driveway gates are common in Austin’s HOA-governed subdivisions, and they fail in a predictable way: repeated thermal expansion loosens the hinge bolts on the top hinge, the leaf drops a fraction of an inch, and suddenly the latch won’t align. On a hot August afternoon the metal expands enough that the gate scrapes the driveway even if it was fine in the morning. We ream, re-torque, and where needed, replace the hinge hardware with genuine Jerith parts.
- Powder-coat flaking at weld joints on pool fences. Austin has more than its share of backyard pools, and Jerith’s pool fence lines see constant chlorinated splash. The failure point is always the same: weld joints where the factory powder-coat is thinnest. Once moisture gets under the coating at a joint, flaking spreads. We strip, treat, and re-coat those joints with matched powder-coat touch-up, which buys years of additional life before a full panel replacement is needed.
- Post lean from expansive clay soil movement. East Austin’s blackland prairie clay shrinks in drought and swells after rain. A Jerith post set in a standard 18-inch concrete collar will shift over several seasons, because the collar moves with the soil. We’re called out to straighten leaning posts more than any other Jerith issue in Austin. The fix is resetting the post in a deeper, wider collar with proper drainage, not just pushing it back and packing dirt around it.
- Self-closing hinges losing tension on pool gates. Austin requires pool gates to self-close and self-latch, and Jerith’s spring-loaded hinges are designed for this. But years of splash exposure and UV cycling weaken the spring tension until the gate no longer closes with enough force to engage the latch. That means a failed city safety inspection. We source genuine Jerith replacement hinges and re-tension them to pass inspection the first time.
- Hail and storm damage on exposed fence runs. Austin hail storms can dent aluminum panels badly, especially the thinner 3-rail residential line. The damage is rarely just cosmetic: dented rails lose rigidity, which transfers stress to posts. We assess the full run for structural compromise, not just visible dents, and we’ll tell you honestly whether section replacement makes more sense than attempting panel straightening.
Jerith Parts & Our Repair-vs-Replace Approach
Jerith uses specific hinge geometries, latch profiles, and powder-coat color codes that aren’t interchangeable with generic fence hardware. When a repair involves structural integrity or code compliance, we use genuine Jerith hinges and latches. They cost more than the aftermarket versions, and there’s a reason: the pin tolerances are tighter, the springs are spec’d to the gate weight, and the powder-coat color actually matches. You don’t want a pool gate that fails inspection because someone saved $30 on a generic hinge.
For non-structural items like post anchors and powder-coat touch-up, we source quality aftermarket products that perform as well without the OEM premium. Our rule is simple: repair first when the fence line is still sound, and recommend replacement when corrosion or post movement affects more than 30% of the run. We’ll show you the math on both options and let you decide. Call (903) 623-1966 for an exact quote on your Jerith fence.
Our Jerith Service Process – Step by Step
- 1
Diagnosis. We inspect the full fence or gate run, not just the section you flagged. For Jerith aluminum, that means checking post plumb against a level, hinge bolt torque, latch alignment, powder-coat integrity at weld joints, and the concrete collars at every post. We’ll tell you what’s actually wrong, in plain language.
- 2
Repair or install. We use genuine Jerith hardware for structural and code-critical components. Posts get reset in deeper concrete collars where Austin’s clay soil demands it. Gates get realigned with the hinge bolts torqued to spec, not just tightened until they feel snug.
- 3
Test. Every gate gets cycled repeatedly. Every pool fence gate gets checked for self-closing and self-latching function, because that’s what the Austin inspector will check. We test in the afternoon heat, when thermal expansion is at its worst, because that’s when a misaligned gate actually scrapes.
- 4
Warranty. Your work is covered by our written guarantee, with terms stated plainly: what’s covered, what’s excluded, and for how long. The Done Right Promise covers any Jerith repair or install for 365 days from the completion date. If it fails, we return free of charge.
Jerith Products We Service & Install in Austin
We work on the full Jerith residential aluminum line: the 3-rail Residential Aluminum Fence in 4-ft and 5-ft heights, the Ornamental Aluminum Fence with spear-top and estate-grade profiles, the Pool Fence line with self-latching code-compliant hardware, and both single and double driveway gate configurations. We stock common Jerith hinge sets, latch assemblies, post anchors, and powder-coat touch-up kits locally so most repairs don’t wait on shipping. When a new install is called for, we also handle aluminum fence installation from layout through final inspection.
See the difference
Before
After
Before
After
Before
AfterWe Also Service These Brands
While Jerith work makes up a good share of our fence and gate service, we’re not a single-brand shop-we’re a full-service General Contractor. We regularly install and service KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures as part of our broader remodeling work. That cross-training matters: we understand how a Jerith fence integrates with the rest of your Austin property.
Jerith Construction Pricing in Austin
| Service | Price Range in Austin |
|---|---|
| Aluminum Fence Installation | $4,000 – $10,000 |
| Garage Conversion | $30,000 – $80,000 |
These ranges reflect typical Jerith aluminum fence installs and garage conversion projects in the Austin market. Actual pricing depends on linear feet, gate count, post depth requirements, soil conditions at your specific lot, and whether we’re matching existing Jerith panels or starting fresh. We write the full price down before any work starts. Call (903) 623-1966 for a free estimate.
One Austin family we worked with had a Jerith aluminum pool fence with two gates that kept failing city inspection. The self-closing hinges had lost tension after years of splash exposure, and both gate posts had started leaning in the expansive clay. We sourced genuine Jerith replacement hinges, reset both posts in deeper concrete collars, and re-tensioned the springs. The fence passed inspection the same day. That’s the kind of fix we do all over Austin, including Pflugerville Jerith service, from the HOA-heavy subdivisions to the older central neighborhoods.
FAQs – Jerith Construction Service in Austin
The most common cause is spring fatigue in the self-closing hinges, not hinge misalignment. Jerith’s spring hinges lose tension over years of UV exposure and chlorinated splash contact, and turning the adjustment screw only works if the spring still has life. On Austin’s clay soils, post lean compounds the problem because the latch no longer lines up straight. We replace the hinges with genuine Jerith parts and reset the post if needed. Call (903) 623-1966 for a free inspection.
Yes. Jerith’s bronze and black powder-coat colors are standardized, and we stock matched touch-up kits and can order factory-matched panels for section replacement. The color match on new Jerith panels is exact because we source them from the manufacturer’s supply chain. Where we’re touching up existing welded joints, we use a matched powder-coat process that holds up to Austin’s UV exposure.
Usually it’s the hinge bolts, not the post. Austin’s heat causes enough thermal expansion that hinge bolts that were torqued correctly in cooler weather loosen and let the gate leaf drop. We check the hinge bolts first, then verify post plumb with a level. If the post has shifted in the clay, that’s a different repair: resetting the post in a deeper concrete collar. We’ll tell you which one you’re looking at before we do anything. Call (903) 623-1966.
Yes. On sloping lots, the failure mode isn’t just post lean from clay movement; it’s lateral pressure from the fence line trying to slide downhill. We set posts deeper on slopes, use larger concrete collars, and where the grade change is significant, we step the fence panels so the rails stay level and the load stays on the posts, not the pickets. It’s standard practice for any Jerith install we do on Austin’s hillier west-side lots and in nearby Jerith repair in Round Rock.
Look at the posts, not the panels. Hail dents panels, but the real question is whether the posts are still plumb and the rails are still straight. If the posts are solid and the rails aren’t bent, replacing damaged sections is usually the right call. If more than 30% of the run has structural compromise, or if the posts themselves are moving, replacement typically costs less than chasing repairs. We’ll give you an honest assessment either way. Estimates are free at (903) 623-1966.
Aluminum fence installation in Austin typically runs $4,000 to $10,000 for a residential Jerith install, depending on linear feet, gate count, post depth, and soil conditions on your lot. Garage conversion work, which often includes fence and gate integration, ranges from $30,000 to $80,000. Call (903) 623-1966 for a written estimate on your specific project.
Book Your Jerith Service in Austin, TX
We know Jerith fencing and gates, and we know the Austin soil, sun, and safety codes that make them fail. If your Jerith fence is leaning, your gate is sagging, or your pool fence won’t pass inspection, call (903) 623-1966. A live person answers, every time. We’ll put the price in writing before any work starts.
Written by Isaac Pruett, Owner at Mason Remodeling Co Austin, serving Austin since 2004.
