Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Driveway & Pavers: The Austin Owner’s Guide
Jerith driveway and paver work in Austin typically runs $7,000 – $18,000 for a full installation, with most repairs landing between $400 and $2,500 depending on what failed and how much ground it covers. We stock common Jerith-compatible paver profiles and edging components on our trucks, and we can usually diagnose the failure on the first visit. Most Austin homeowners discover the problem the same way: a paver sinks after a heavy rain, a section of edging pulls loose near the curb, or the sand between pavers washes out faster than it used to.
You’re not looking for a whole new driveway in most cases. You’re looking for the right piece, matched to what’s already in the ground, installed so it stays put through the next freeze-thaw cycle. That’s what this page covers.
Key Takeaways
- Jerith driveway repairs in Austin typically run $400 – $2,500; full paver driveway replacement runs $7,000 – $18,000.
- We match existing paver profiles, color blends, and edge restraints rather than patching with whatever’s on the shelf.
- Most failures trace to the base or the edge restraint, not the paver itself.
- Call (903) 623-1966 for a free estimate, and we’ll confirm the part before we touch anything.
Which Jerith Models This Applies To
Jerith is known for aluminum fencing and railings, but many Austin yards pair those fence lines with paver driveways, walkways, and patio borders that tie into the same layout. The driveway and paver components we service include the concrete and clay paver units themselves, the plastic or aluminum edge restraints that hold the field together, the polymeric sand joints, and the aggregate base layers underneath.
Here’s the compatibility gotcha most owners hit: Jerith fence posts are often set in concrete footings that run right up against paver edges. If a paver shifts or sinks near a post, the post can start leaning within a season. So matching the paver replacement to the fence line matters. We measure paver thickness (typically 60mm or 80mm for driveways), check the joint width, and match the color blend against a dry sample before we order anything. Jerith doesn’t manufacture pavers directly, so what you’re really matching is the paver brand and profile installed originally, whether that’s Belgard, Unilock, or a regional Texas supplier. We stock OEM-equivalent pavers for the most common Austin profiles and can source exact matches for everything else within a few days.
Styles & brands we work with
Signs Your Jerith Driveway & Pavers Is Failing
- Sinking or depressed pavers near the fence line. This usually means the aggregate base has washed out or settled unevenly. Water runs along the Jerith post footings, erodes the base, and the pavers drop.
- Polymeric sand washing out after every rain. Austin’s heavy spring downpours test joints hard. If the sand keeps disappearing, the joint material failed or was never activated properly, and water is now working its way under the field.
- Edge restraints pulling away from the driveway. Plastic edging degrades under Texas sun and heavy tire loads. Once it lets go, the outer pavers start creeping outward, and the whole field loses tension.
- Cracks or spalling on pavers near the garage apron. Clay pavers hold up well, but concrete pavers near the apron take a beating from turning tires. The repeated torque cracks them, and they stop shedding water.
- Standing water pooling in low spots that used to drain. If the original install didn’t account for slope, or if the base settled, water pools instead of running off. That standing water accelerates every other failure on this list.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Driveway sealing in Austin runs $250 – $700, and that’s often the first fix we recommend if the pavers themselves are still sound. A paver repair where we lift a section, re-level the base, and reinstall the same pavers typically lands between $400 and $1,800 depending on square footage and how much base material needs to come out. Full paver driveway installation runs $7,000 – $18,000, with the spread driven by paver type (concrete pavers cost less than clay), the depth of base we need to replace, and whether your Jerith fence posts need re-anchoring at the same time.
What that price includes: demo of the failing section, base repair or replacement, the pavers and edging themselves, joint sand, compaction, and cleanup. We hand you a written price before any work starts, and the 365-Day Done Right Promise covers the finished work for a full year from completion. If something shifts or a paver cracks within that year, we come back and make it right at no charge.
DIY or Call Us?
You can safely check a few things before you call. Walk the field after a rain and note where water pools. Push down on any pavers that look low and see if they rock. Check the edge restraints near the curb and fence posts and look for gaps. Those observations help us quote the job faster.
What we don’t recommend is pulling pavers yourself. The paver itself is rarely the only problem, and lifting a section without fixing the base just means you’ll lift it again after the next storm. Edging and sand joints look simple, but if the base hasn’t been re-leveled and compacted, new pavers settle within weeks. This is physical work with real weight involved, and the failure usually lives underneath what you can see. If you’re in Austin and the edge is pulling away or the field is sinking, call (903) 623-1966. Tell me what’s wrong with it. We’ll figure out what it actually needs.
FAQs
Properly installed paver driveways in Austin last 25 – 40 years, but the base and edging usually need attention around the 15-year mark, especially after repeated freeze-thaw winters. If your pavers are failing before year 10, the base or edge restraint is almost certainly the culprit. Call (903) 623-1966 and we’ll tell you what’s actually going on underneath.
Yes, most paver failures are repairable. We lift the affected section, re-level and compact the base, reset the pavers, and re-sand the joints. Replacement only makes sense when the pavers themselves are cracked or spalled beyond reuse. Estimates are free, so call us for a straight answer.
A single-section repair usually takes one day on site. Full driveway replacements in Austin run three to five days depending on square footage and whether we’re re-anchoring Jerith fence posts at the same time. We’ll give you a written timeline with the estimate.
We stock common paver profiles, edge restraints, and joint sand on our trucks for the most frequently installed Austin systems, including Belgard and Unilock profiles. If your pavers are from a smaller Texas supplier, we source the exact match within a few days. Call (903) 623-1966 and we’ll confirm the match before we schedule.
Mason Remodeling Co Austin is an independent service provider and is not affiliated with Jerith. We also stock parts and materials for KraftMaid, Cambria, and Silestone projects.
If your driveway is sinking near the fence line or the edges are pulling loose, don’t wait until the next rain makes it worse. Call Isaac and the team at Mason Remodeling Co Austin at (903) 623-1966 for a free estimate. We’ll send a background-checked, uniformed technician with a photo ID badge to your door, put the price in writing before we start, and stand behind the work for 365 days.
Written by Isaac Pruett, Owner, Mason Remodeling Co Austin at Mason Remodeling Co Austin, serving Austin and nearby areas.
