Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Construction in Austin, TX | Mason Remodeling Co Austin
We provide independent CWS cabinetry and countertop service across Austin, and the one thing that sets our work apart here is simple: we know how CWS cabinets behave in limestone dust, hard water, and Texas humidity because we see them in Austin remodels every single week. Mason Remodeling Co Austin is not affiliated with or authorized by CWS – we’re a third-party construction company that repairs, installs, and refaces CWS products. If you need CWS work done right, call (903) 623-1966 for a free estimate.
Why Austin Residents Choose Us for CWS Service
We’re a CWS sales & service provider with deep local roots serving Austin service area homeowners. Isaac Pruett, our owner, learned the trade at Los Angeles Trade-Technical College and has spent years doing residential and commercial work up and down the West Coast before bringing his crew to Austin. He’s the guy who shows up on time, gives straight estimates, and doesn’t leave until the punch list is actually done. That matters when you’re dealing with CWS cabinetry that’s been through a few Austin summers.
What homeowners appreciate most is that we’re transparent about who’s coming. The Threshold Standard means every technician is background-checked, identity-verified, and arrives in a clean marked uniform with a photo ID badge at the door. You’ll have their name and photo before they even ring the bell. And every project gets a written price before any work starts – no verbal estimates that grow on the final bill.
Styles & brands we work with
Common CWS Construction Problems We Solve in Austin
- Drawer glides binding from limestone dust. When we do kitchen tear-outs on West Austin hillside jobs, cutting into rock kicks up fine grit that settles into CWS undermount slides. The glides bind, pop off, or grind. We pull them, clean the tracks, and replace with OEM-matched glides.
- Doors warping in humidity. CWS cabinetry sitting in unconditioned garages or humid mudrooms during Austin’s 90°F-plus dew-point summers will warp. Doors go out of square, hinges rub, and soft-close mechanisms misalign. We re-square doors and recalibrate hinges when possible.
- Plywood end panels delaminating after slab leaks. Austin’s 1990s – 2000s CWS installs often used particleboard toe kicks that wick water into the boxes. A slab leak or dishwasher overflow delaminates the end panels. When we see this, we’re honest: a delaminated sink base is usually cheaper to replace than rebuild.
- Inset door gaps binding on east-side clay. Austin’s blackland prairie clay shrinks and swells with drought and rain. CWS Estate Series doors lose their 3/16-inch reveal when piers shift and the cabinet run goes out of level. We re-level runs and reset the reveals.
- Soft-close mechanisms failing from dust and wear. Austin’s construction boom means homes near active job sites collect dust. CWS Euro-spec 110° hinges and soft-close mechanisms have non-standard screw spacing, so we keep OEM-matched hinge plates and touch-up kits on hand for fast turnaround.
CWS Service in Austin: What Local Conditions Mean for Your Equipment
Here’s what nobody tells you about CWS cabinetry in West Austin: hitting limestone within 10 feet of grade is so routine that we stage CWS cabinet deliveries off-site and hand-carry boxes up steep driveways. A 26-foot box truck physically cannot turn around on many pre-1950s bungalow lots in neighborhoods like Tarrytown or Bouldin Creek. And rock excavation for foundation piers often delays Austin Bathroom Remodeling and cabinet installation by weeks, not days. So we plan around it. Your CWS cabinets sit in climate-controlled storage until the site is actually ready, and we schedule installation to start the day excavation finishes, not before.
On the east side, it’s a different story. Expansive clay means your foundation moves. A CWS kitchen built on a pier-and-beam that hasn’t been re-leveled in two decades will have doors that bind and drawers that stick. We check cabinet runs with a level before we touch a single hinge. If the run is off, we tell you, and we fix the root cause before we adjust the doors.
CWS Models & Products We Service in Austin
We work on every CWS line Austin installers have put in over the years:
- CWS Signature Series – full-overlay framed cabinetry with plywood boxes and dovetailed drawers. We handle drawer repairs, hinge replacements, and full refacing.
- CWS Estate Series – inset-door cabinetry with soft-close hinges and adjustable legs. We reset reveals, replace hinges, and re-level runs that have shifted on Austin’s clay.
- CWS Builder Series – frameless euro-style cabinetry common in spec remodels across Mueller and the 1990s suburban tracts. We replace glides, reface doors, and rebuild sink bases.
- CWS Quartz and Granite Countertop Fabrication – 3cm stone with mitered edges. We install, seam, and replace CWS stone countertops and match edge profiles.
For parts, we lean on OEM-matched drawer glides, hinge plates, and touch-up kits. CWS uses Euro-spec hardware with non-standard screw spacing, so aftermarket parts rarely fit right. We’ll go aftermarket only when a line is discontinued and the homeowner knows what they’re getting.
See the difference
Before
After
Before
After
Before
AfterCWS Service Pricing in Austin
What does CWS work cost in Austin? We give written line-item pricing before any work starts, so you know exactly what you’re paying. Here are the ranges we see most often:
| Service | Austin Price Range |
|---|---|
| Cabinet Installation & Refacing | $4,000 – $13,000 |
| Quartz & Granite Countertops | $2,000 – $6,500 |
| Full Kitchen Remodeling | $14,000 – $45,000 |
Your price depends on the CWS line you have, whether we’re refacing or replacing, and the size of the kitchen. A small galley in a 1950s bungalow runs differently than a full Mueller kitchen. Every free estimate includes a written price, the scope of work, and our 365-Day Done Right Promise: if the work is not right within a year of completion, we make it right at no cost to you. Call (903) 623-1966 to schedule yours.
Serving Austin, TX - Our Local Coverage Area
We’re based in the Austin area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – CWS Construction in Austin
Yes, in most cases we can. We keep a library of CWS finish samples and work with a local Austin finisher who can match stains and glazes on Signature and Builder Series fronts. When a line is fully discontinued and the finish can’t be matched, we’ll reface the entire run so every door front matches, then hand you the written price before we start. Call (903) 623-1966 to talk through your specific cabinets.
Bedrock within 10 feet of grade means foundation work and utility trenching take longer and cost more. We plan cabinet deliveries around excavation schedules, stage boxes off-site when driveways are too tight for a truck, and install the day the site is ready. Your CWS kitchen doesn’t get delayed because we didn’t plan. That’s the difference local experience makes.
Yes. CWS used Euro-spec 110° hinges and soft-close mechanisms with non-standard screw spacing. We stock OEM-matched hinge plates and soft-close replacements for Signature, Estate, and Builder Series lines. If your specific hinge is discontinued, we’ll tell you before ordering anything.
Yes, if it’s done right. We use moisture-stable plywood panels and finishes matched to your existing CWS doors, and we adjust for the expansion and contraction that Austin’s 90-degree summers bring. Refaced CWS cabinets we’ve done in Bouldin Creek and Crestview are still holding up years later because we account for humidity from day one.
We do. Post-tension slabs move less than pier-and-beam on Austin’s east-side clay, but they still settle. We check the slab with a level before installing CWS cabinetry, and we shim or adjust as needed so your doors and drawers operate clean from day one. Call (903) 623-1966 to schedule a free estimate.
Service Areas Near Austin
We serve Austin and the surrounding communities: CWS service in Round Rock, CWS service in Pflugerville, plus San Marcos, Brushy Creek, and Hutto. If you’re within an hour of Austin, we can likely help with your CWS cabinetry or countertop project.
Book Your CWS Service in Austin Today
Tell me what’s wrong with it. We’ll figure out what it actually needs. That’s how Isaac approaches every CWS job, and it’s how we’ve built our reputation in Austin. Call (903) 623-1966 today for your free estimate – we answer live, and we’ll get you a written price before any work begins.
Written by Isaac Pruett, General Contractor - Austin, serving Austin since 2004.
