Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Austin Homeowners Choose CertainTeed Construction
We provide Certainteed service in Austin as an independent construction provider, from roof replacements with Landmark shingles to FlintBoard trim repair. As an independent CertainTeed service provider, we are not tied to a manufacturer sales agenda, so our recommendations are based on what your home actually needs, not what a quota says to push. Austin’s hail, humidity, and limestone-heavy terrain create specific failure patterns in CertainTeed materials, and our crews see them weekly. Call (903) 623-1966 for a free estimate.
CertainTeed makes some of the most widely installed roofing, siding, and trim systems in Central Texas. Landmark architectural shingles show up on thousands of Austin roofs, from Mueller bungalows to Certainteed service in Round Rock tract homes. Presidential Shake gives newer builds that hand-split cedar look without the maintenance. NorthGate SBS-modified shingles handle impact better than standard composition. And FlintBoard plus Restoration Millwork trim wrap fascia and corners on homes from Hyde Park to Avery Ranch. We know these products because we work on them every week. Not just the install, but the repair realities they develop after a decade of Texas sun.
Here is what that means in practical terms. We know that a Landmark roof that looks fine from the street can be hiding broken seal strips after one bad hail season. We know that CertainTeed XT and CT class shingles shed granules faster in Austin heat than in most markets and that those granules end up clogging downspout strainers. We know that FlintBoard fascials rot at cut edges when the original installer skipped sealing them. A manufacturer’s spec sheet will not tell you any of that. We will.
Why Trust Mason Remodeling Co Austin for Your CertainTeed Construction?
Isaac Pruett, our owner, came up through Los Angeles Trade-Technical College and spent years on residential and commercial work along the West Coast before bringing his crew to Austin. He has been serving homeowners here for several years now, including General Contractor services in the Mueller neighborhood. The crew’s approach to CertainTeed products is the same as Isaac’s approach to an old table saw he is restoring in his garage: figure out what is actually wrong before you start replacing things. “Tell me what’s wrong with it. We’ll figure out what it actually needs.” That mindset keeps our CertainTeed work honest. We do not sell a full roof replacement when a targeted repair will hold.
Every crew member who arrives at your Austin home is background-checked, identity-verified, and uniformed under the Threshold Standard. You get the technician’s name and photo before the visit, and a photo ID badge at the door on arrival. That matters when you are letting strangers walk your roof deck or work around your side yard. We also put a written price in your hand before any work starts. On every CertainTeed job, every time. No verbal estimates that grow. No surprise invoices at the end. And if something we repair or install fails within 365 days of completion, we come back and make it right at no cost under our Done Right Promise.
In 2024, a homeowner off Parmer Lane called us about a CertainTeed Landmark roof that had lost four shingles in a March windstorm. Our tech walked the roof, found the broken seal strips, and instead of quoting a $14,000 replacement, we laced in matching shingles and hand-applied asphalt adhesive to reseal the south-facing slope. Total cost: under $1,200. That is the difference between a crew that knows CertainTeed failure modes and one that just quotes new roofs.
Styles & brands we work with
Common CertainTeed Construction Problems We Fix in Austin
Austin’s climate is rough on roofing and exterior trim. The combination of 100-degree summers, sudden downpours, and hail cells moving through the Hill Country creates recurring failure patterns in CertainTeed products. Here are the five we see most often:
- Wind-lifting of CertainTeed Landmark tabs after hail. Hail does not just dent shingles; it shatters the heat-activated sealant strip that bonds each tab to the course below. On older Landmark roofs, especially those with 10-plus years of Austin sun exposure, we commonly find broken seal strips on the windward slope. The shingle looks present, but a stiff gust lifts it and exposes the fiberglass mat underneath. On a 2006 two-story in Round Rock, our tech found exactly this over the garage, removed the damaged course, pulled the popped nails, and laced in matching Landmark driftwood shingles from trailer stock.
- Heat-induced granule shedding on CertainTeed XT, CT, and classic shingles. All composition shingles lose granules over time, but Austin’s sustained summer heat accelerates it. CertainTeed’s entry-level lines shed surface granules faster than heavier architectural lines, and those granules wash down valleys and collect in gutters. Homeowners notice a downspout strainer clogged with what looks like black sand, or a bald patch forming on the south slope. Granule loss on its own is not always a replace-now situation, but it does signal lost UV protection.
- CertainTeed NorthGate cap nail heads popping after temperature swings. NorthGate uses SBS-modified asphalt for better impact resistance, but the cap nails that secure the ridge and hip shingles can work themselves loose as the modified asphalt expands and contracts with Austin’s day-to-night temperature spreads. A popped nail head leaves a small opening, and that opening becomes a flashing leak during the next downpour. It is a five-minute fix when caught early and a water-stained ceiling when ignored.
- Moisture swelling in CertainTeed FlintBoard fascia at unsealed cut edges. FlintBoard is a PVC-based trim that resists rot, so homeowners assume it is maintenance-free. It is not. Any cut edge that the original installer left bare will wick moisture into the board core, causing swelling, paint delamination, and eventually, rot at the seam. We see this most on west-facing eaves in Austin, where afternoon sun beats the trim and rain drives in behind it. The fix is cutting out the affected section and replacing it with properly sealed material.
- Presidential Shake losing granules at a faster rate than expected. Presidential Shake is a premium architectural shingle with a thick, dimensional profile. That profile looks great, but the deep shadow lines catch and hold debris, and the raised surface exposure means more of the shingle face takes direct sun. In Austin, we see Presidential Shake roofs developing visible granule channels along the exposure lines within 12 to 15 years, earlier than a standard architectural shingle might. It is not a defect; it is a reality of the climate.
CertainTeed Parts & Our Repair-vs-Replace Approach
When a CertainTeed roof or trim system needs attention, there are two paths: repair with matched parts or replace with a newer CertainTeed line. We use CertainTeed exact-match shingles and components when the roof is still under warranty or when the customer wants a seamless patch on a visible slope. CertainTeed’s color lines, like Landmark driftwood or weathered wood, are still manufactured, so a color match is usually available through our Austin supplier network. We keep common CertainTeed profiles and colors in trailer stock for faster turnaround on repair calls.
The honest question is always whether repair is worth it. If a Landmark roof has lost seal strips on one slope after a single hail event, repair makes sense. If that same roof has granule loss on three slopes, failing deck tape, and is 18 years old, we will tell you that repeated repairs will cost more than a full replacement within a few years. In those cases, we often recommend upgrading to CertainTeed NorthGate or a fresh Landmark system rather than patching an aging roof one square at a time. For trim and siding, we source CertainTeed profiles directly when available, but we will also tell you when a discontinued line means a primed wood alternative makes more sense than hunting down obsolete stock. Call (903) 623-1966 if you are unsure which path fits your roof.
Our CertainTeed Service Process – Step by Step
Here is how a Typical CertainTeed call goes with our Austin crews:
- 1
Diagnosis. We walk the roof or trim and document what we find with photos. If it is a CertainTeed shingle issue, we check seal strips, nail heads, flashing points, and granule condition before we recommend anything. You see the photos and the written price before any tool touches your home.
- 2
Repair or install. For repairs, we pull the damaged course, remove popped nails, and lace in matching CertainTeed shingles or trim sections. For replacements, we strip to deck, check for rot, and install the CertainTeed system with proper underlayment and flashing details that meet or exceed the manufacturer’s install spec.
- 3
Test and verify. We run water over repair points to confirm no leaks before we leave. For trim work, we check cut-edge sealing and paint adhesion at every joint.
- 4
Warranty coverage. Every CertainTeed job we complete in Austin carries our written guarantee, and our 365-Day Done Right Promise means a free return visit if anything we touched fails within a year of completion.
See the difference
Before
After
Before
After
Before
AfterCertainTeed Products We Service & Install in Austin
Our crews work across the CertainTeed lineup, including Landmark architectural shingles, Presidential Shake, NorthGate SBS-modified shingles, and FlintBoard plus Restoration Millwork trim. For roofing work, we keep common Landmark colors and starter components in trailer stock, and we can source the full CertainTeed catalog through our Austin supply chain within a few days. For trim and fascia, we match existing CertainTeed profiles and finishe.
We Also Service These Brands
We are not tied to a single manufacturer. Alongside CertainTeed, our Certainteed in Pflugerville and Austin crews work with KraftMaid cabinetry, Cambria and Silestone surfaces, and Kohler fixtures on full remodels. That multi-brand range means we can give you an honest recommendation for your project, not whichever brand happens to be on our truck.
FAQs – CertainTeed Construction Service in Austin
We repair when the damage is isolated to a slope or two and the shingles are otherwise in good shape. If hail has broken seal strips across multiple slopes, or the roof is 15-plus years old with granule loss, replacement is usually the better call. Call (903) 623-1966 and we will walk your roof before we quote you anything.
Yes. NorthGate installs on standard decking, provided the deck is sound. We strip the old 3-tab, check for rot, and install with the proper underlayment and flashing details. Expect the NorthGate system to add impact resistance compared to a standard 3-tab or architectural shingle, which matters in Austin’s hail belt.
The deep, dimensional profile of Presidential Shake exposes more shingle face to direct UV, and the shadow lines trap debris that holds moisture against the asphalt. In Austin’s heat and humidity, that combination accelerates granule shedding along the exposure lines. It is not a manufacturer defect; it is a climate interaction. We can tell you if your roof is shedding at a normal rate or if something else is going on.
We use CertainTeed flashing components when the project calls for an exact match, especially on warrantied roofs. Where aftermarket flashing performs identically and the manufacturer’s version is discontinued or backordered, we will use it and tell you exactly what we installed and why. Call (903) 623-1966 for a straight answer on your specific roof.
We cut out the swollen or rotted section, inspect the underlying framing for moisture damage, and install a replacement section with every cut edge sealed before paint. If the rot is widespread, we will tell you whether to replace affected boards or the full trim run. Sealing cut edges is the key detail most original installations miss.
Below are the market ranges we see for CertainTeed work in Austin. Your exact price depends on roof condition, access, and scope.
| Service | Typical Austin Price Range |
|---|---|
| Roof Replacement (CertainTeed Landmark) | $8,000 – $20,000 |
| Roof Repair (CertainTeed shingle patch) | $400 – $1,800 |
| Metal Roof Installation (often paired with CertainTeed underlayment) | $15,000 – $40,000 |
| Tile Roof Repair (if mixing with CertainTeed metal flashings) | $600 – $2,500 |
Call (903) 623-1966 for an exact quote. Estimates are free.
Book Your CertainTeed Service in Austin, TX
If your CertainTeed roof, siding, or trim needs attention, call (903) 623-1966. We will schedule a free estimate, put the price in writing before any work starts, and send a verified technician with a name and photo so you know exactly who is coming. Austin’s climate is hard on exteriors. Our job is to make sure yours is ready for it.
Written by Isaac Pruett, Owner at Mason Remodeling Co Austin, serving Austin since 2004.
