Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cambria Driveway & Pavers: The Austin Owner’s Guide
Cambria driveway and paver systems in Austin typically run $7,000 to $18,000 installed, depending on square footage, base prep, and whether we’re matching existing Cambria product or starting fresh. We stock the most common Cambria-compatible paver sizes and edge restraints on our trucks, so most driveway repairs and replacements can be quoted and scheduled within a few days of your call. Most Austin homeowners discover a problem the hard way: a paver shifts under a car tire, a low spot turns into a puddle that never drains, or the edge of the driveway starts spreading into the lawn after a heavy rain.
You’re probably on this page because a section of your driveway isn’t sitting right anymore. Maybe a paver cracked. Maybe the sand between joints washed out and now everything moves when you walk on it. Either way, you want to know what it’ll cost to fix and whether it’s worth saving what’s there. We’ll walk you through both.
Which Cambria Models This Applies To
Cambria’s paver line for driveways and walkways includes several series that Austin homeowners have installed, and the part numbers matter more than the marketing names. The two we see most often are the Brussels Block-style pavers (commonly 4×8 and 6×9 formats, roughly 60mm thick for driveway traffic) and the larger slab-style pavers that Cambria markets for patios but that some Austin builders spec for driveways anyway. That second one is a compatibility gotcha: slab pavers under 60mm thick are not rated for vehicle weight, and in Austin’s clay soil they’ll crack at the first big dry spell when the ground shifts beneath them.
If you’re matching existing pavers, measure a clean paver’s length, width, and thickness in millimeters, and note the edge profile. Cambria has changed chamfer profiles between production runs over the years, and a paver that’s off by two millimeters in thickness will show every time you walk across it. For anything no longer in production, we can usually source a close-match aftermarket paver from one of our hardscape partners, but we’ll tell you plainly if the color match isn’t great before you spend a dime.
One thing to be clear about: Mason Remodeling Co Austin is an independent service provider. We install and repair Cambria driveway and paver systems, but we’re not a Cambria factory store or a company affiliate. That just means we can tell you the truth about what your driveway needs without trying to sell you a whole new one to satisfy a corporate quota.
Styles & brands we work with
Signs Your Cambria Driveway & Pavers Is Failing
- Sinking or low spots near the garage apron. Austin’s blackland prairie clay expands and contracts with moisture, and if the base under your pavers wasn’t compacted properly (or was laid over unexcavated soil), the whole section drops an inch or two. You’ll see it as a visible dip where water collects after rain.
- Pavers rocking underfoot or under tires. This means the bedding sand has migrated out through the joints, leaving voids under the pavers. Every car that drives over the driveway pumps out a little more sand. It gets worse the longer you ignore it.
- Joint sand completely gone, weeds growing between pavers. Austin’s rain events are flashy and hard. Without joint sand, water channels straight down into the base and washes it away. Weeds are a symptom, not the cause.
- Edge pavers spreading outward into the lawn or flower bed. The edge restraint has failed or was never installed. Without a proper edge, the entire paver field loses its compression lock, and the outside rows start to drift.
- Hairline cracks across multiple pavers in a line. That’s usually not a paver defect. It’s the base moving underneath, typically from a utility trench that was backfilled and not recompacted before the pavers went down. We see it in Austin all the time over old sewer laterals and water line repairs.
Replacement Cost & What’s Included
For a full paver driveway replacement in Austin, you’re looking at $7,000 to $18,000. That range covers everything from a modest two-car driveway with simple sand-set installation to a larger or sloping driveway that needs a proper crushed-limestone base, geotextile fabric, and concrete edge restraints. Most of the variance isn’t in the pavers themselves. It’s in what’s underneath: excavation depth, base material, and drainage corrections.
A partial repair, like re-leveling a sunken section or replacing a cracked paver field, usually runs $2,000 to $6,000 depending on size and access. What you get with us: a written price before any work starts, paver replacement and base repair done by a named crew, and our 365-Day Done Right Promise on the finished work. If a section we set starts moving within a year of completion, we come back and fix it at no charge. No dispute, no deductible, no fine print games.
You’ll get a line-item quote so you can see exactly what you’re paying for: demolition and haul-off, base material, pavers, sand, labor, and disposal. Nothing shows up on the final bill that wasn’t on the first page of the quote.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Replacing a single cracked paver in a walkway is something a handy homeowner can manage with a rubber mallet, a flat bar, and a bag of joint sand. If the pavers aren’t under vehicle load and the base underneath is still solid, go for it. But re-leveling a sunken driveway section or rebuilding a failing edge is not a weekend project. You need the base excavated and recompacted in lifts, and if you skip that step, you’ll be redoing the job in eighteen months.
There’s a real safety side to this too. Driveways that slope toward your foundation and aren’t draining properly are actively undermining your slab. A paver driveway that’s channeling water toward the house isn’t just ugly; it’s a structural risk. If you’re seeing cracks inside your foundation wall on the same side as a sinking driveway, stop guessing and call us at (903) 623-1966. We’ll tell you what’s wrong with it and figure out what it actually needs.
FAQs
A properly installed paver driveway with a good base will last 25 to 30 years in Austin before the pavers themselves need replacement, though you’ll typically re-sand the joints every 3 to 5 years. The base is the long-lived part. If your base was done right the first time, future repairs are mostly cosmetic and inexpensive. Call (903) 623-1966 if you want us to look at what you’ve got and tell you honestly how much life is left in it.
In most cases, we can repair the failing section. Pavers are modular by design, which means a bad section doesn’t condemn the whole driveway. We excavate the affected area, rebuild the base, and reset the original pavers, assuming they’re still structurally sound. If some are cracked, we’ll match what we can and tell you up front if the color match won’t be perfect. A repair typically saves Austin homeowners thousands versus a full replacement.
A section repair is usually a two-to-three-day job: day one for demo and excavation, day two for base rebuild and paver reset, day three for joint sand and compaction cleanup if needed. A full driveway replacement typically runs four to seven working days depending on size, weather, and whether we need to correct drainage. Austin’s afternoon thunderstorms in spring and fall can stretch that, but we schedule around them as best we can. You’ll get a firm schedule with your written quote.
We keep the most common Cambria-compatible paver sizes, edge restraints, and joint sand on our trucks, which lets us handle the majority of Austin repair calls without waiting on a supplier. For exact-match replacements where we need a specific production run or discontinued color, we order from our hardscape partners, and that’s usually a three-to-five-day lead time in the Austin market. Either way, your written quote includes all material costs, so there’s no surprise when the pavers show up.
Get an Exact Quote on Your Cambria Driveway Repair
Tell me what’s wrong with it. We’ll figure out what it actually needs. That’s how Isaac Pruett approaches every driveway call in Austin, and it’s why we write the price down before we pick up a shovel. You’ll know who’s coming (name and photo before they arrive, photo ID badge at the door), what the job costs, and what we guarantee for 365 days after completion. Call (903) 623-1966 to schedule your free estimate, and a live person will answer, any day of the year. We also carry parts for KraftMaid, Silestone, and Kohler if you have other projects stacking up while we’re out there.
Written by Isaac Pruett, Owner, Mason Remodeling Co Austin at Mason Remodeling Co Austin, serving Austin and nearby areas.
