Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Barrette Roofing: The Austin Owner’s Guide
If you have a Barrette roof and something’s failed, we can get the right part matched and installed. Most Barrette roofing repairs in Austin run between $400 and $1,800 depending on the damage, and we stock the common Barrette-compatible components on our trucks so a single visit usually handles it. You’ll typically notice the problem after a storm or a stretch of hot weather: a shingle tab torn loose, a ridge cap that shifted, or granules washing into the gutter. Barrette built roofing products for years under several brand names, and the parts are still available if you know what you’re looking for. We do.
A quick note before we go further: Mason Remodeling Co Austin is an independent service provider. We’re not affiliated with Barrette, and we don’t claim to be. What we do claim is that we know their product lines, we know what fails in Texas heat, and we’ll give you a written price before any work starts.
Which Barrette Models This Applies To
Barrette’s roofing footprint in Austin mostly comes from their shingle lines sold through big-box and regional suppliers, plus a run of metal edging and ridge accessories. The key thing to understand is that Barrette manufactured under their own name and also private-labeled for other brands, which means the same part sometimes wears a different label. The shingle dimensions and nail pattern are what matter, not the name on the wrapper.
To identify your part, walk the roof line or check the box in your garage. Barrette architectural shingles are measured in the same 36-inch width as most standard shingles, but the exposure, the part you see, runs about 5-5/8 inches. If you have a Barrette ridge cap, the profile is a specific 12-inch folded design. We match by measurement, not memory. As for OEM versus aftermarket: Barrette’s original manufacturing lines have largely been absorbed into other companies, so a true OEM part is often just a repackaged version of the same shingle sold under a current name. We’ll tell you when an aftermarket equivalent is identical in gauge, profile, and color match, and when you’re better off spending a little more for the closest visual match. In Austin, sun fade is real, and a shingle that looked right in a catalog photo can stand out hard against a 7-year-old roof. We account for that before you pay anything.
Styles & brands we work with
Signs Your Barrette Roofing Is Failing
- Granules in the gutter. Barrette shingles shed granules as they age, especially after hail or heavy UV exposure. If you’re finding a thick layer of grit in your downspouts, the shingle surface is wearing down faster than it should, and it’s a sign the substrate is about to be exposed.
- Curling or lifting tabs. Texas heat bakes the adhesive strip on the underside of each shingle. Once that bond fails, the tab lifts and catches wind. On Barrette architectural shingles, this shows up first on the south-facing slopes where the sun hits hardest.
- Missing ridge cap pieces. The ridge is the highest point of the roof and the first thing wind gets hold of. Barrette ridge caps are nailed then sealed, and once a hailstorm or a strong frontal line comes through, a loose cap means water has a direct opening to the ridge beam.
- Water staining on the ceiling or upper walls. By the time you see a stain inside, the roof has been leaking for a while. The Barrette underlayment and shingle combination is meant to shed water, but a failed seam or a cracked shingle lets water work its way in slowly.
- Shingles that feel brittle or crack when tapped. Asphalt loses its oils over time and becomes brittle. A Barrette shingle that was once flexible will eventually snap like a cracker. Once that happens, the next hailstorm will punch right through.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a Barrette roof repair in Austin, the installed price range is $400 to $1,800. A simple shingle replacement or small section repair lands on the lower end. Ridge cap replacement, flashing repair, or replacing a section where the underlayment is compromised pushes toward the top of that range. If the decking underneath has rot from a long-standing leak, the price can exceed $1,800 because you’re now into structural repair, not just roofing. A full Barrette roof replacement in Austin runs $8,000 to $20,000 depending on square footage, pitch, and whether we’re tearing off the old layer or going over it.
Every price we give is in writing before the first shingle comes off. No verbal estimates that grow on the final bill. The parts cost is listed separately from labor, so you see exactly what you’re paying for. And our work is covered by the 365-Day Done Right Promise: if something we fixed fails within a year of completion, we come back and make it right at no cost to you. That’s not a promotional offer. It’s standard on every job we do.
DIY or Call Us?
You can safely check a few things yourself. Walk the property line and look for missing shingles, get eyes on the ridge line if you can do it from the ground, and check the gutters for excessive granules. That’s useful information when you call us because it helps us plan the first visit. What you shouldn’t do is get on the roof. Steep pitch, brittle shingles, and a Texas afternoon sun make a ladder and a bucket of tar a genuinely bad combination. A fall off a roof is a life-changing injury or worse, and it’s not worth saving a few hundred dollars.
If you’ve got a Barrette roof, tell me what’s wrong with it. We’ll figure out what it actually needs. Then we’ll put a written price in your hand and let you decide. Call (903) 623-1966 and a live person answers, day or night.
FAQs
Barrette architectural shingles typically last 15 to 25 years in Central Texas, but Austin’s heat and hail routinely knock that toward the lower end. South-facing slopes age fastest. If your Barrette roof is past year 18 and you’re seeing multiple failing shingles, replacement may cost less per year than repeated repairs. Call (903) 623-1966 and we’ll give you an honest read on what’s left in your roof.
Yes, a single shingle or a small section can be repaired as long as the underlying underlayment and decking are still sound. We’ll clean the area, lift the surrounding shingles carefully, replace the damaged piece with the closest color and profile match, and reseal the seam. For an exact quote, call (903) 623-1966, estimates are free.
Most Barrette shingle and ridge cap repairs are completed in one visit that runs two to four hours. If we find decking damage or need to match an unusual color, we’ll tell you before we start and schedule the additional work for a second visit. Either way, you’ll have a written price before any work begins.
Yes, we carry the common Barrette shingle profiles, ridge caps, and compatible flashing on our trucks. That means most repairs are done in one trip. For anything we don’t have on hand, we order it through our standard suppliers, including the same channels we use for other specification-grade products like KraftMaid, Cambria, and Silestone.
Written by Isaac Pruett, Owner, Mason Remodeling Co Austin at Mason Remodeling Co Austin, serving Austin and nearby areas.
