Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Ameristar Kitchen Remodeling: The Austin Owner’s Guide
Ameristar kitchen remodeling in Austin typically runs $14,000 to $45,000 for a full kitchen project, depending on cabinet line, countertop material, and how much structural work the space needs. We stock and install Ameristar-compatible cabinetry and hardware, and we can usually have your replacement parts sourced and scheduled within a week. Most Austin homeowners discover an Ameristar cabinet or hardware failure the hard way: a drawer face pulls loose, a soft-close hinge snaps, or a cabinet box starts separating at the corner joint after a few humid Central Texas summers.
If you’re standing in your kitchen right now with a cabinet door hanging crooked or a drawer that won’t close, this page will tell you exactly what you’re dealing with, what it costs to fix, and whether it’s a job you want us to handle. Mason Remodeling Co Austin is an independent service provider, not affiliated with Ameristar, which means we’ll give you an honest read on whether to repair or replace, without any brand loyalty getting in the way of the right call.
Which Ameristar Models This Applies To
Ameristar kitchen cabinetry spans several series lines, and the parts are not all interchangeable. The most common cabinets we see in Austin homes are the Ameristar frameless (full-access) line and the framed traditional series. The frameless line uses thicker ¾-inch cabinet box material and hidden Blum or Salice-style hinges, while the framed series typically uses a ½-inch box with exposed hinges and a face-frame overlay door. That distinction matters when you’re replacing hardware because the hinge cup size, overlay measurement, and mounting plate all change between the two.
The fastest way to identify your exact cabinet is to pull a drawer and look for the model sticker on the inside of the drawer box or the cabinet side panel. You’re looking for a four-to-six digit series code, usually printed above the Ameristar logo. If the sticker is gone (common in older installs), measure the cabinet box side thickness: ¾-inch means frameless, ½-inch means framed. That single measurement tells us which hardware family to pull from. On the OEM-versus-aftermarket question, we’ve found that Ameristar OEM hinges and drawer glides hold up better than generic big-box replacements, but quality aftermarket soft-close mechanisms from Blum or Salice often outlast the original Ameristar hardware in high-use kitchens. We’ll quote you both options so you can choose.
Styles & brands we work with
Signs Your Ameristar Kitchen Remodeling Is Failing
- Drawer boxes sag or scrape when you open them. The undermount glide has lost its roller bearing or the side-mount track has bent from weight. Continued use grinds the track and eventually snaps the glide mount off the cabinet box.
- Cabinet doors hang at a slight downward angle or won’t stay closed. The hinge cup has wallowed out the screw holes in the door or the mounting plate has shifted. It looks minor, but a dropped door eventually splits the hinge-side stile.
- Soft-close no longer catches on one or two drawers only. The internal damper inside the glide has failed, which means that drawer slams shut while the others still slow properly. This is the single most common Ameristar hardware failure we replace in Austin.
- Cabinet box corner joints are separating or the back panel is pulling away. Central Texas humidity swings cause the composite panels Ameristar uses in some series to delaminate. Once the corner joint opens, the box loses rigidity and the cabinet starts twisting.
- Adjustable shelf pins keep falling through elongated holes. The pre-drilled shelf pin holes have worn wide from years of weight shifts, and now the shelf drops on one corner. You can shim it, but the fix is a new end panel or a pinned shelf bracket.
If you’re seeing one of these, don’t wait. A failed hinge or glide puts stress on the adjacent cabinet parts, and what starts as a $200 hardware fix turns into a $1,500 cabinet box replacement when the door finally tears free.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Austin homeowners, here’s what we charge across the most common Ameristar kitchen remodeling repairs and replacements:
| Job | Installed Price Range |
|---|---|
| Cabinet hardware replacement (hinges, glides, dampers) | $800 – $2,500 |
| Single cabinet box replacement (installed) | $1,200 – $3,500 |
| Countertop replacement (laminate or solid surface) | $2,000 – $6,500 |
| Full kitchen remodel (Ameristar-compatible cabinetry) | $14,000 – $45,000 |
| Kitchen island installation (new build) | $3,000 – $10,000 |
Every quote we give in Austin is a written price before any work starts. That price covers the parts, the labor, and the cleanup. If we open a wall or pull a cabinet and find something the first contractor botched, we’ll stop and show you what we found before another dollar gets spent. Our work carries a 365-Day Done Right Promise: if anything we installed is not right within a year of completion, we come back and make it right at no cost to you. No invoice, no service call fee, no back-and-forth.
DIY or Call Us?
You can safely check a few things yourself before you call anyone. Pull the drawer, look at the glide, and see if a screw has backed out. Check whether the hinge mounting plate is tight against the cabinet box. Those are diagnostic checks, not repairs, and they’ll help you describe the problem accurately when you call.
What we’d caution against: replacing Ameristar cabinet hardware yourself if the doors are heavier than about 15 pounds, if the cabinet box itself has split, or if you’re dealing with an overhead cabinet that has pulled loose from the wall. A falling cabinet box is heavy enough to cause real injury, and countertop removal without knowing whether the substrate is asbestos-containing (common in Austin homes built before 1985) is a job for a licensed crew with proper testing. Tell me what’s wrong with it. We’ll figure out what it actually needs. Call (903) 623-1966 and have a photo of the label or the failed part ready if you can.
FAQs
Ameristar kitchen cabinets in Austin typically last 15 to 25 years before doors, drawer glides, or the cabinet boxes themselves need serious attention. The Texas heat and humidity swings shorten hardware life on the soft-close mechanisms to about 8 to 12 years. Our climate is harder on composite cabinet panels than the dry West Coast, which is where Isaac Pruett first learned the trade before bringing the crew to Austin. If your cabinets are past year 15 and you’re replacing hardware for the second time, we’ll tell you honestly whether a full kitchen remodel is the better investment. Call (903) 623-1966 and we’ll take a look.
Yes, in most cases a failing Ameristar cabinet can be repaired, especially if the failure is hardware-related like a hinge, glide, or damper. If the cabinet box itself is delaminating or the corner joint has separated, a repair buys you time but usually doesn’t hold. We’ll tell you which one you’re dealing with when we see it.
A full hardware swap on a standard 10-cabinet Ameristar kitchen takes one day to one and a half days, assuming the cabinet boxes are sound. If we’re replacing an entire cabinet box or doing countertop work alongside, expect three to seven days. We’ll put the timeline in writing before we start.
We keep the most common Ameristar-compatible hinges, glides, and dampers on the truck, and we can source OEM Ameristar parts within a week for anything we don’t carry. We also work with KraftMaid, Cambria, and Silestone when the best fix is an upgrade rather than a match. Call (903) 623-1966 with your model info and we’ll confirm availability before you waste a trip.
If your Ameristar kitchen is showing its age, call Mason Remodeling Co Austin at (903) 623-1966 for a free estimate. We’ll come out, identify the exact part or problem, and put a written price in your hand before any work begins. And you’ll know exactly who’s walking through your door: our crew is background-checked, identity-verified, and you’ll get the technician’s name and photo before they arrive. That’s the Threshold Standard, and it’s how we’ve done every job in Austin since day one.
Written by Isaac Pruett, Owner, Mason Remodeling Co Austin at Mason Remodeling Co Austin, serving Austin and nearby areas.
