A Mason company - serving Austin, TX
A remodeled primary bathroom with a soaking tub and a walk-in shower

Delta Roofing Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Austin
A powder room with botanical wallpaper and a stone sink
A wood double vanity with two mirrors after a bathroom remodel
A remodeled primary bathroom with a soaking tub and walk-in shower
A freestanding soaking tub in a remodeled primary bathroom
A walk-in shower with large-format tile and a built-in niche
A single-story rear room addition with tall windows and a new patio
An open kitchen and dining area after a remodel
A whole-home remodel with the living, dining and kitchen areas opened up
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

Your dream remodel for as low as$199/month*On approved credit; ask for current terms
Get your free estimate

Delta Roofing: The Austin Owner’s Guide

If you’re holding a failed Delta roofing component or staring at a ceiling stain that appeared after the last Hill Country storm, here’s the straight answer: Mason Remodeling Co Austin stocks and installs Delta-compatible roofing parts throughout the Austin area, with most roof repairs running between $400 and $1,800 depending on what failed and how much decking or flashing got taken with it. A full Delta-class roof replacement in Austin typically lands between $8,000 and $20,000 for standard architectural shingle work on an average single-family home. Most Austin homeowners discover a roofing part failure the same way: a water stain spreads across the drywall, a shingle ends up in the yard after a wind gust off Lake Travis, or a home inspector flags granule loss before closing. Our job is to match the right Delta-spec component to your roof, give you a written price before anything gets pulled apart, and get it sealed same-week so the next downpour doesn’t find a way in.

Call (903) 623-1966

One note up front: Mason Remodeling Co Austin is an independent roofing and remodel contractor. We are not affiliated with Delta, but we know their product line well enough to source the correct parts quickly, install them properly, and stand behind the work.

Key Takeaways:

  • Delta roofing repair costs in Austin run $400 – $1,800; full replacement runs $8,000 – $20,000.
  • We stock common Delta-compatible seals, flashing, vents, and underlayment on our trucks.
  • You get a written price before work starts, and a written guarantee on every repair.
  • Every technician is background-checked and identity-verified under the Threshold Standard, with name and photo provided before arrival.

Which Delta Models This Applies To

A low-threshold walk-in shower with a bench and grab bar

Delta’s roofing line has shifted over the years, and the part number on your original paperwork may not match what’s currently on the shelf. Most Austin homes we service fall into one of three buckets: architectural asphalt shingle roofs installed by builders using Delta’s mid-tier product line, standing-seam metal panels where the fastening clips and gaskets are the first things to go, and vent-and-flashing combinations around chimneys, skylights, and plumbing stacks. The compatibility gotcha we see most often is that Delta changed its pipe boot collar size on two occasions over the last decade. A plumbing vent from a 2014 roof may take a 3-inch collar, while the same visual pipe on a 2020 roof needs a 3.25-inch. If you’ve got the original attic paperwork or a shingle wrapper with a printed code, snap a photo before you call. If not, we measure on site.

For Delta-specific parts, we recommend OEM components whenever they’re still available, because the color match on ridge cap and accent course shingles is virtually impossible to hit with aftermarket. For generic components like ice-and-water shield, synthetic underlayment, and pipe boots, quality aftermarket equivalents perform just as well and often cost less. We stock both and tell you the price difference before you decide.

Explore

Styles & brands we work with

Kitchen remodeling
Kitchen remodeling
Bathroom remodeling
Bathroom remodeling
Home additions & ADU
Home additions & ADU
Roofing
Roofing
Windows & doors
Windows & doors
Driveway & pavers
Driveway & pavers
Fence
Fence

Signs Your Delta Roofing Is Failing

  • Granules in the gutters. Delta asphalt shingles shed granules over their lifespan; the problem is when your downspouts look like a black sand beach every spring. It means the protective surface is degrading faster than it should, leaving the asphalt underneath to bake under the Texas sun.
  • Curling or raised shingle edges. Austin’s heat cycles are brutal. High attic temperatures can cook shingles from below, causing edges to lift. Once lifted, the next windstorm becomes a peel test.
  • Water stains in the attic or on ceilings. Any new discoloration after a storm is a failure alert. In Austin, we get severe downpours that test every seam; a leak usually traces back to a failed boot, cracked flashing, or broken seal at a roof penetration.
  • Loose fasteners or lifted panels on metal roofing. Delta metal panels rely on clip-and-gasket assemblies. When gaskets dry out and crack in Texas heat, panels can rattle, lift, or detach at the lap seams. You’ll hear it on windy days before you see it.
  • Light streaming through the roof deck. If you can see daylight from inside the attic, the roof has an open breach. That’s beyond a repair question; it’s a call-us-today situation before the next storm brings the Hill Country into your hallway.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A remodeled hall bathroom with subway tile and a floating vanity

In Austin, a Delta-compatible roof repair that involves replacing a section of shingles, a pipe boot or two, and re-sealing flashing typically runs between $400 and $1,800 installed. The range shifts based on the slope of your roof, whether we need to pull and replace decking, and how many layers of old material have to come off first. On a replacement, the $8,000 to $20,000 range reflects the same split: a simple single-story ranch in Round Rock with a standard pitch lands at the lower end, while a steep two-story in Westlake with multiple valleys and custom trim lands at the upper end.

Every quote we write in Austin is itemized. You’ll see parts, labor, dump fees, and permit costs listed separately. The number we hand you is the number you pay; we do not run change orders mid-job unless you ask us to expand the scope. The work carries a 365-Day Done Right Promise: if the repair or replacement fails within one year of completion, we return and make it right at no charge.

DIY or Call Us?

Roof work is one place where safety has to come before savings. Walking a roof in Austin means contending with steep pitches, heat-slick surfaces, and sudden weather shifts. Falls from roof height are serious, and the risk multiplies if you’re carrying tools and materials. We don’t recommend DIY repairs on anything beyond a visual inspection from the ground or a safe spot inside your attic.

What you can safely do: check your gutters for granule buildup, look for daylight in the attic, and photograph any visible damage with your phone. What you should not do: climb a ladder with a caulk gun and a YouTube tutorial. If a boot was installed wrong or the flashing wasn’t seated, the repair fails at the first storm, and the original problem plus water damage costs more than the professional repair would have. Tell me what’s wrong with it. We’ll figure out what it actually needs. Call (903) 623-1966 and describe what you’re seeing. We’ll get an honest price to you, in writing, before any work starts.

FAQs

A remodeled hall bathroom with patterned floor tile and painted walls

Getting started with Mason in Austin

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Austin team

A local crew that works across Austin and the towns around it, to the same written standard as every Mason location.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in Austin? Licensed & insured · Free on-site estimates response · free estimates
Call (903) 623-1966
Local Service Coverage

Request a Free Estimate in Austin

Tell us what you need - Mason Remodeling Co Austin responds fast. No obligation.

By providing your information above, you agree to the terms of our Privacy Policy and consent to receive communications by phone, email, or text about your request, including by the independent contractors we may refer it to.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch