Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Construction in Round Rock, TX | Mason Remodeling Co Austin
We provide independent KraftMaid cabinet installation, refacing, and repair as a General Contractor in Round Rock. What makes our KraftMaid work different here is simple: we understand how Round Rock’s blackland clay and humidity actually affect cabinet boxes, hinges, and drawer glides, and we price the fix before we start. Call (903) 623-1966 for a free estimate from a crew that knows this town’s construction quirks.
Why Round Rock Residents Choose Us for KraftMaid Service
KraftMaid cabinetry shows up in hundreds of Round Rock kitchens, from Teravista to Mayfield Ranch to Sonoma. We have opened enough of those cabinet doors to know which hinge systems hold up and which ones do not. Isaac Pruett, our owner, came up through the construction trade on the West Coast and has spent years fixing what Central Texas slabs and humidity do to kitchen cabinetry. He has seen Vantage and Durham doors swell in the same spots, in the same neighborhoods, season after season. That pattern recognition means we diagnose faster and do not sell you a replacement when a shim and a new set of glides will fix it.
We are an independent KraftMaid service provider, not a manufacturer-authorized dealer. That matters in your favor: we are free to be honest about whether a repair or a reorder is the smarter spend. Read more about our broader KraftMaid sales & service work, or keep reading for what Round Rock conditions do to these cabinets.
Styles & brands we work with
Common KraftMaid Construction Problems We Solve in Round Rock
- Hinges loosening on Vantage and Durham doors. The particleboard cores in these lines are dense, and they swell in Round Rock’s humid summers. The screw holes wallow out, and the door starts to sag. We install longer screws or threaded inserts and realign the door to the face frame. This is the single most common KraftMaid call we get in Round Rock.
- Drawer glides binding as slab movement racks the cabinet box. Homes on blackland clay heave and settle, and islands take the worst of it. The box twists out of square, and the glide binds or the drawer rubs the face frame. We true the box with shims, reset the glides, and tighten the face frame so the drawer rolls clean again.
- Laminate edge banding peeling at dishwashers and cooktops. Steam rises from the dishwasher and hits the cabinet run above or beside it. The edge banding lifts at the corners and curls. We reglue or replace the banding, and we will tell you if a heat shield or vent makes sense behind the appliance.
- Thermofoil doors blistering in bathrooms. Round Rock bathrooms with weak exhaust fans trap heat and moisture. Thermofoil doors blister and peel, especially on vanities. We can replace the doors, or reface the vanity with a material that shrugs off humidity better than thermofoil.
- Pull-out trays seizing in high-use pot-and-pan cabinets. When the box is out of square even slightly, bottom-mount glides on pull-outs bind and the tray sticks. We shim the cabinet, reset the glide, and in most cases you do not need new hardware, just a square box to let the existing glide work.
KraftMaid Service in Round Rock: What Local Conditions Mean for Your Equipment
Round Rock sits on the Balcones Fault zone, and homes east of I-35 are more prone to slab heave than those west of it. We have straightened more KraftMaid cabinet runs in Sonoma and Stone Oak than in any other part of town. That is not a marketing line; it is where the clay is. When an island in Sonoma pulls away from the wall and the drawer glides bind, it is rarely a hardware failure. It is the slab moving under the box. A crew that has only ever worked new construction in cedar-lined subdivisions west of Austin may not read the problem correctly. We do. We start by checking whether the cabinet box is square and whether the face frame has separated from the box sides. Then we shim, re-square, and reset the hardware. The fix usually costs a few hundred dollars, not a few thousand for new cabinets. But we will also tell you when the box is split or the frame has racked beyond shimming, because in that case a reorder of just the damaged cabinet is often cheaper than repeated patching.
KraftMaid Models & Products We Service in Round Rock
We work on the KraftMaid lines most common in Round Rock kitchens: Vantage, Durham, Benton, and Hudson. That covers the full-shaker look of Vantage, the slab-door simplicity of Durham, the classic raised-panel Benton, and the transitional Hudson. For repairs, we use genuine KraftMaid replacement hinges, glides, and touch-up kits when local suppliers have them on hand. For discontinued door styles, we source quality aftermarket matches that match the original finish and grain. We do not substitute hardware that does not fit the original bore pattern without telling you first. If you want new cabinets installed or an existing kitchen refaced, we handle the full construction scope from tear-out to final trim. See what we cover across the Round Rock service area.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Service Pricing in Round Rock
Here are our current price ranges for KraftMaid work in Round Rock. These are written-price ranges, not vague verbal estimates. The price we give you before work starts is the price on the final bill.
| Service | Price Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Cabinet Refacing | $5,000 – $15,000 |
| Kitchen Design & Layout | $800 – $2,500 |
| Small & Partial Kitchen Remodels | $9,000 – $20,000 |
What drives the cost is the scope of the cabinet run, whether we are refacing existing boxes or hanging new ones, and whether the slab movement means shimming and truing before the new work goes in. A free estimate means we look at the kitchen, measure, and hand you a written line-item price. Call (903) 623-1966 to schedule yours.
Serving Round Rock, TX - Our Local Coverage Area
We’re based in the Round Rock area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – KraftMaid Construction in Round Rock
Sticking doors in Round Rock are usually caused by humidity swelling the particleboard cores, or by slab movement racking the cabinet box out of square. We shim the box, realign the hinges, and in most cases the door closes clean without replacing anything. Call (903) 623-1966 for an exact diagnosis and price.
Yes. Refacing keeps the existing cabinet boxes and replaces the doors, drawer fronts, and hardware. For Teravista homes with sound boxes but dated door styles, refacing runs $5,000 to $15,000 depending on the size of the kitchen. That is typically less than half the cost of full new cabinets. Call (903) 623-1966 and we will measure your kitchen and give you a written price.
Most of the time, yes. We had a Mayfield Ranch call where a Benton wall cabinet pull-out had seized because the slab shifted and racked the box. We shimmed the box, trued the face frame, and reset the glide. No new cabinet needed. Six months later it still rolled like new, but we pointed out the drainage issue that caused the heave. Call (903) 623-1966 and we will take a look.
We do. If the drawer faces are still in good shape but the boxes are split or the dovetails have loosened, we build or order replacement boxes and match the existing front. This is a common, cost-effective repair in Round Rock homes where the faces are fine but the boxes took years of humidity and slab movement.
Solid wood doors from the Vantage and Hudson lines hold up better than thermofoil in Round Rock’s humid summers, especially in kitchens without a strong range hood or in bathrooms with weak exhaust fans. If you are refacing, we will steer you toward door materials that do not blister when the dew point climbs. Call (903) 623-1966 and we will walk you through the options and the price difference.
Service Areas Near Round Rock
We serve Round Rock and the surrounding communities, including KraftMaid service in Pflugerville, KraftMaid service in Austin, plus Hutto, Brushy Creek, and San Marcos. If you are in one of these areas and your KraftMaid cabinets need construction work, call (903) 623-1966.
Book Your KraftMaid Service in Round Rock Today
Tell us what is wrong with your cabinets. We will figure out what they actually need. Call (903) 623-1966 for a free estimate, a written line-item price, and a crew that shows up with a name and a photo you already know.
Written by Isaac Pruett, Owner at Mason Remodeling Co Austin, serving Round Rock since 2004.
