Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Austin Homeowners Choose Therma-Tru Construction
We provide independent Therma Tru repair in Austin, including entry door adjustment and full replacement service across the metro, handling everything from weatherseal swaps to complete frame rebuilds inside larger remodeling projects. What sets our Therma-Tru work apart is that we see these doors inside the context of the entire opening: how the framing sits, how the exterior cladding meets the jamb, and how Texas heat and cedar pollen work against the weatherstripping over time. We’re not an authorized Therma-Tru dealer or factory service center, but we are the crew Austin homeowners call when a door that cost thousands has started sticking, leaking, or rattling and nobody else can explain why. If you need straight answers and a written price before any work starts, call (903) 623-1966.
Why Trust Mason Remodeling Co Austin for Your Therma-Tru Construction?
Our crews install and service Therma-Tru doors inside full-scale remodels across Austin, so we understand how a Classic-Craft or Fiber-Classic slab behaves in relation to the rough opening behind it, not just as an isolated unit on a spec sheet. Isaac Pruett, our owner, learned framing and finish carpentry at Los Angeles Trade-Technical College and spent years doing residential and commercial work up and down the West Coast before bringing that experience to Austin. He’s seen what happens when a heavy fiberglass door gets hung on short screws, or when a south-facing entry with no overhang starts cooking the jamb every afternoon. That’s the difference between a door shop that swaps parts and a remodeling crew that understands structure. Every technician who arrives at your door is background-checked, identity-verified, in a clean marked uniform, and will show a photo ID badge before stepping inside. You’ll get their name and photo before the visit, per the Threshold Standard. The written price comes before any work begins, on every Therma-Tru job, every time. And if something isn’t right within 365 days of completion, we make it right at no cost under our Done Right Promise.
Styles & brands we work with
Common Therma-Tru Construction Problems We Fix in Austin
- Warped or swollen jambs on south-facing entries. In Austin neighborhoods like Mueller and Barton Hills, afternoon sun beats directly on front doors without adequate porch overhangs. The fiberglass skin holds up, but the wood jamb behind it absorbs heat and moisture unevenly, causing the door to bind at the top corner by late afternoon. We see this constantly on Classic-Craft units installed on west- and south-facing elevations.
- Failing compression weatherstrip on Classic-Craft doors. Cedar pollen season in Austin runs from December through February, and the fine dust that settles into the bottom sweep acts like sandpaper against the rubber. After two or three seasons, the compression weatherstrip loses its spring. The door still looks fine, but daylight starts showing under the threshold, and HVAC bills creep up.
- Weeping sill channels clogged with limestone grit. Most of Austin sits on or near Edwards limestone, and construction dust plus wind-blown grit collects in the sill’s drainage channels. When those channels plug up, water ponds against the threshold and wicks into the wood frame. We clean the channels, verify slope, and replace the sill cap when the original has cracked from repeated wet-dry cycles.
- Hinge-side misalignment on heavy Smooth-Star slabs. Smooth-Star doors are lighter than the Classic-Craft line, but they’re still substantial units. When the original installer used 2.5-inch screws that only bite drywall and a thin jamb, the weight of the slab slowly pulls the hinge side down and in. The door starts scraping the latch-side jamb, and the deadbolt no longer lines up. We rehang these with 4-inch screws driven into the king stud.
- Delamination at the bottom rail on older units. Therma-Tru’s fiberglass bottom rails are tough, but on doors from the early 2000s in Austin’s humid climate, the seam between the skin and the rail can start to separate after years of standing water from clogged sills. Once the skin peels back far enough to expose the foam core, a field patch rarely holds. In those cases we’re honest: replacement usually costs less than rebuilding the slab.
Therma-Tru Parts & Our Repair-vs-Replace Approach
We use genuine Therma-Tru OEM weatherstripping, adjustable sills, and hinge kits whenever the door is still under factory warranty, or when the homeowner specifically wants factory parts. For out-of-warranty doors and discontinued finishes, we’ll spec quality aftermarket seals and milled jambs that match the door’s exact thickness and profile. But we don’t push parts for the sake of a quick fix. If the slab itself is delaminating at the bottom rail, or the frame has rot extending more than six inches up from the threshold, we’ll tell you straight that a full replacement usually costs less than a rebuild. The numbers don’t lie on this. A new pre-hung Therma-Tru door starts around $1,200 before installation, while rebuilding a rotted frame with new jambs, brickmould, sill, and labor can hit $2,000 quickly and still leave you with an aging slab. If you’re unsure which way to go, call (903) 623-1966 and we’ll put an honest assessment in writing, free.
Our Therma-Tru Service Process – Step by Step
- 1
Diagnosis. We start by checking the reveal around all three sides of the slab, the sill slope, and how the weatherstrip seats when the door closes. On Classic-Craft and Fiber-Classic units we also check the seal where the fiberglass skin meets the bottom rail, looking for early delamination before it spreads.
- 2
Repair or replacement quote. Once we know what’s actually wrong, we hand you a written price. That’s it. No verbal ballparks that grow on the final invoice. You’ll see the line items before a single tool is unpacked.
- 3
Repair or install. If we’re rehanging, we use 4-inch screws into the king stud behind each hinge, composite shims instead of scrap wood, and we reset the adjustable sill to the manufacturer’s drainage spec. If we’re replacing, the old unit comes out, the rough opening gets inspected and corrected, and the new Therma-Tru door gets set, shimmed, sealed, and flashed.
- 4
Testing. We close the door, check operation from inside and out, run a smoke test on the weatherseal when air infiltration was the complaint, and verify the deadbolt throws cleanly. We don’t leave until the latch engages with a single finger, not a shoulder.
- 5
Warranty. Every job carries a written guarantee with clearly stated terms: what’s covered, what’s excluded, and for how long, 365 days from the completion date. If anything fails, we come back free. No dispute process, no conditions.
See the difference
Before
After
Before
After
Before
AfterTherma-Tru Products We Service & Install in Austin
We work on the full Therma-Tru residential entry line: Classic-Craft with its deep wood-grain fiberglass, the smooth-surface Fiber-Classic, the lighter-weight Smooth-Star series, and the modern Pulse line with its integrated multi-point locking system. We service existing doors for adjustments, weatherseal replacement, sill work, hinge rehangs, and threshold repair. We also supply and install new pre-hung units in fiberglass and steel, including doors with sidelites and transoms. We don’t stock finished doors on a shelf in Austin. Each unit gets ordered to your exact dimensions, swing, and finish, then installed by our crew. Lead times run three to six weeks depending on the series and options.
We Also Service These Brands
Our Austin remodeling work regularly brings us into contact with materials from KraftMaid and Wellborn cabinetry, Cambria, Silestone, and Caesarstone surfaces, plus Kohler, Moen, Toto, and Grohe fixtures. If your Therma-Tru door project sits inside a larger kitchen or bath remodel, we can handle the whole scope as your General Contractor, under one written price and one warranty.
FAQs – Therma-Tru Construction Service in Austin
No. We’re an independent remodeling company in Austin that works on Therma-Tru doors as part of larger construction projects, not a factory-authorized dealer or service provider. That independence means we have no incentive to push a replacement when a repair makes more sense, and no manufacturer quota shaping our advice. We use OEM parts when they’re the right call and tell you when they aren’t worth the money.
Yes, when the door is still under factory warranty or when you specifically request factory components. For out-of-warranty doors with discontinued finishes, we’ll spec quality aftermarket weatherstripping and milled jambs that match the door’s dimensions. We always tell you which we’re using and why, in writing, before any work begins. Call (903) 623-1966 and we’ll walk you through it.
Most weatherseal, sill cleaning, and hinge rehang jobs take a single visit of two to four hours. A full slab replacement with new jambs and brickmould usually runs one full day. If the rough opening needs reframing or the surrounding exterior cladding has water damage, plan on two days. We’ll give you a clear timeline with your written price so there’s no guessing.
We service and install the Classic-Craft, Fiber-Classic, Smooth-Star, and Pulse lines, including units with sidelites and transoms. If you’ve got an older Therma-Tru door from the 1990s or early 2000s and can’t find the model name, send us a photo or read us the markings on the hinge edge of the slab and we’ll identify it before the visit.
Using third-party parts can affect warranty coverage on newer doors, which is exactly why we default to OEM Therma-Tru components when your door is still under factory warranty. We also document every repair and adjustment so you have a record if a warranty claim ever comes up. For out-of-warranty doors, the question is moot, and we’ll recommend the most cost-effective fix that will actually hold up in Austin’s climate.
That’s almost always a jamb that’s absorbing afternoon heat and expanding, especially on south- and west-facing entries in Austin where there’s little or no porch overhang. The fiberglass slab itself doesn’t move much, but the wood jamb behind it swells as temperatures climb, pinching the door at the top corner. Often the fix is as simple as adjusting the reveal and resetting the hinges, but sometimes the jamb needs to be replaced with a pressure-treated or composite unit that won’t move as much. Tell me what’s wrong with it. We’ll figure out what it actually needs. Call (903) 623-1966 for an exact diagnosis and a free estimate.
On most Fiber-Classic doors you can replace just the bottom sweep, provided the sweep channel in the door’s bottom rail is still intact. If the channel is cracked or the adhesive backing on the original has left residue that prevents a clean seat, the whole kit is the better route. We’ll inspect the bottom rail before quoting either way, so you’re not paying for parts you don’t need.
Small cracks in the fiberglass skin can sometimes be filled and refinished by a specialist, but if the crack is near the bottom rail and has broken the seal between the skin and the core, moisture gets inside and delamination follows. In Austin’s humid summers, that process moves fast. Chasing a patch on a door that’s already compromised often costs more over two years than replacing the slab once. We’ll tell you honestly which category yours falls into.
That rattle usually comes from the weatherstrip not seating firmly against the slab, which has more to do with jamb alignment than hinge tightness. Over time, Austin’s expansive clay soils shift the framing enough that the jamb springs slightly out of square. The door doesn’t sag, but it doesn’t press into the weatherstrip evenly either. Resetting the jamb and replacing worn compression seals fixes it. We’ve done exactly this on doors across Mueller and nearby areas, and we also provide Pflugerville Therma Tru service where the clay movement is constant.
Probe the wood with a screwdriver. If the rot stays within the bottom six inches, you can often replace just the jamb legs and sill and keep the existing slab if it’s in good shape. If the rot has climbed past six inches and reached the king stud, you’re looking at reframing and a full replacement is usually the cheaper path. We’ll show you what we found, not just tell you. Call (903) 623-1966 and we’ll schedule the inspection.
Book Your Therma-Tru Service in Austin, TX
If your Therma-Tru door is sticking, leaking, rattling, or just showing its age, call (903) 623-1966 for Therma Tru repair in Round Rock and throughout the Austin area. A live person answers 24 hours a day, every day of the year. We’ll schedule a time that works, send the technician’s name and photo before the visit, and put your written price in your hands before anything gets touched. Free estimates, every time.
Therma-Tru Service Pricing in Austin
| Service | Price Range in Austin |
|---|---|
| Full Kitchen Remodeling (including entry door trim-out) | $14,000 – $45,000 |
| Full Bathroom Remodeling | $9,000 – $28,000 |
| Roof Repair (flashing around door caps and porch roofs) | $400 – $1,800 |
Written by Isaac Pruett, Owner at Mason Remodeling Co Austin, serving Austin since 2004.
